This Is The One In Wall Fireplace Trick Every Person Should Learn

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

A fireplace in the wall gives an elegant and polished appearance without the cost of mantles. It is one of easiest electric firesuite fireplaces.

There are a few things to think about before buying your in wall fireplace. Follow these suggestions to get the most out of your investment.

Height

While it may appear to be an easy task, figuring out the height of your new fireplace is one of the most important decisions you make. The size of your fireplace's height can affect everything from how it fits in a room to its visibility. Having your fireplace raised too high can look unnatural and detract from the beauty of the piece. On the other the other hand, having your fireplace set too low could cause it to be lost in the wall space.

Luckily electric fireplaces are able enough to be installed at various heights. For instance, a majority of people prefer to place their fireplaces at eye level from a sitting position. This typically requires a height of between 40 and 42 inches from the floor to the bottom of the fireplace. Some people place their fireplaces beneath their TVs. This is an attractive alternative.

However, the height of your fireplace will be determined by a few things, including the size of the room and the length of the wall where you'd like to put it. The bigger the room the more spacious it will be. This could mean that you are in a position to fit a bigger fireplace into it. The length of a wall is also important, as a longer wall can accommodate a bigger fireplace.

The way you plan to make use of your fireplace is an important factor. If you only intend to use it for decorative purposes, a smaller height will work best. If you intend to heat your home using it, you'll need to make sure that the fireplace is tall enough to meet local codes and safety standards.

It is important to choose the appropriate height for your fireplace, so that it will match your decor and is easy to clean or fill. If you're not sure what size to choose, you can always contact a professional fireplace installer for assistance. They can recommend the ideal height for your fireplace, in accordance with their expertise and your home's layout.

Depth

The depth of a fireplace is crucial to know if you want to put it in a recessed place. If you are planning to cut into the wall, ensure that you have enough space to accommodate the fireplace's internal design (the space for the smoke shelf above the firebox as well as the flue that extends upwards from the roof). Also, think about the space you will have for the surround and whether you would like a mantle.

A lot of the most recent electric fireplaces have an incredibly deep depth that is invisible, creating an "integrated" appearance. The Panorama Bi-Deep series is a fantastic example of this kind of electric fireplace that is wall-mounted. It has an 5.8-inch depth that allows the viewer to see the flames and the ember bed, not the frame of the fireplace. It is also equipped with a range of media packages including natural-looking driftwood logs white pebbles, clear glass crystals that reflect the flames and enhance the ember bed.

Gas wall-mounted fireplaces can be found in both deep and shallow models. But, when deciding the depth of your fireplace it is important to keep in mind that these fireplaces function as a supplemental heat source and should be properly vented by a skilled professional. When determining the depth of gas fireplaces, you need to consider the length of the vent pipe as well as the size of the chimney.

It is important to read and adhere to the instructions provided by the manufacturer when installing your fireplace electric. In most instances, hiring a professional to install your fireplace is highly recommended. Also, it is always recommended to have an additional person on hand when installing a gas fireplace.

Adding an in-wall fireplace to your home can be an excellent way to increase its value and add ambiance to your living spaces. It can also lower your heating costs. It is an excellent option for those who are unable to install a traditional fire place in your home due to space restrictions or due to the location of a chimney.

Surface Mount

If you're not able or prefer not to cut through your wall or construct a space to accommodate an electric fireplace, a surface mount gives a sleek and modern look. Some models, like the Allusion line of electric fireplaces, can be installed partially recessed into a wall without compromising the output of heat.

To start the installation process, determine where you want your fireplace to be installed and make a mark with a pencil along the wall where the bracket will be put. Use a stud finder to find the studs in that area and make sure the mounting bracket is placed in front of one or more studs for stability. If a stud can't be reached or isn't suitable for your fireplace, you could use drywall anchors as a support.

Once you have identified the location of the mounting brackets on the wall, use a power drill to install them and ensure that they are aligned correctly with the studs. If possible, attach each bracket to a stud for strength and stability, but you can also use anchors made of plastic in the event of need. After the mounting brackets have been installed then lift the fireplace up and hang it from the bracket. After it's secured, you can check the position of your fireplace electric to ensure that it's straight and not crooked within the opening.

Before proceeding with the installation, plug in your fireplace and ensure whether all features are operating correctly - turn on the fire, and then ignite the flames, play around with embers, heat, bed lights and so on. When you're satisfied with the results, it's time to install your floating mantel.

Based on the model of your fireplace, you'll have to connect the wire connection to the appliance wire connector at the lower part of the mantel. Or in the event that your fireplace has hooks or slots on the back, connect them to the slots on the wall mounting brackets. After you've completed this step make sure to consult the user manual for directions on how to remove the glass front panel from the opening and replace it.

After you've removed the front panel of your fireplace and placed it into the opening, follow the manual's specifications to finish the installation by replacing the glass front and adjusting the height as necessary. If your fireplace has ember bed media, spread it over the top of the grille to create a natural appearance. Secure it using the screws included.

Plug-In

Unlike traditional wood-burning fireplaces, electric fireplaces don't require chimneys or vents. They're plugged into an outlet that is standard, providing supplemental heating for rooms that are up to 400 square feet. You can also alter the ambience with a variety of flame and heat settings. Some models feature LED lighting effects that highlight the embers and ethonal fire. Some models have a grille on top that hides the manual controls, however they can easily be opened to reveal buttons.

Electric fire places with plug-ins can be installed directly on the wall or recessed to create an appearance of a built-in. They are generally more straightforward to install than mantel fireplaces. Some models have a pedestal that allow you place the fireplace on flat surfaces, such as a buffet or dresser. Included is the remote control, mounting hardware and a log set. Based on the model, these electric fireplaces may include both heat and flame options that can be turned off for year-round ambiance.

Some models have privacy glass that can be easily adjusted from fully transparent to partially transparent. These models are popular for walls that divide zones of entertainment such as dining and living rooms. These models are ideal in bedrooms, where fireplaces is a cost-effective option to warm a room and keep it private.

Plug-in electric fireplaces do not need to be hardwired like built-in versions they must be mounted within the wall that is at least free of studs and able to support the weight of the fireplace. Some models come with an accessory kit to make this process more simple by providing a pre-wired power cord and a bracket for mounting. This kit can be used for either concrete or drywall installation.

When deciding on a place for your wall-mounted electric fireplace, make sure it's close to an electrical outlet. Depending on the model that you choose, plug-in electric fireplaces may be connected to outlets that are connected to the same circuit or a separate circuit for your electric fireplace. It is best to choose an exclusive circuit to ensure that nothing else in your home will be operating at the same voltage and could cause a trip to your circuit breaker.