This Is A Guide To Saab 9-3 Key Replacement In 2023

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of special steps to install an additional ignition key. It requires dealer service using the handheld computer known as Tech-2. A new key and transponder are required to be purchased and then programmed into the car.

Make sure to rotate your keys in order to prevent one from wearing out faster than the next. This will help to keep your keys in pristine condition.

Replacement Case

As opposed to the traditional Saab keys of the past keys, the latest key fobs have electronics inside which makes it difficult to make a copy. This has made theft of cars significantly more difficult than 20 years ago. It also makes it more expensive to replace keys lost.

saab 93 key programming 9-3 owners should have two keys that work. It costs a fortune to replace a lost key, as it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers will typically charge $100-$200 to do this.

There are ways to reduce these expensive. Some parts suppliers will search for the code on an extra key (usually the same one that opens the doors and switches the ignition) and cut a new key blade out of metal for less than the dealer's cost. The key must be the exact identical to the original one for it to work in your vehicle.

Follow these steps to replace the case. You'll need a flathead and a lot of patience. With the screwdriver slowly pull the plastic apart and then separate the emergency key from the case. Once the case is open, remove the electronics and place them inside the new case. Place the key with the correct badge into the case.

Replacement Battery

The Saab 9-3 replacement battery is a cheap component that can be quickly and easily replaced. This video tutorial on DIY from YouTube Cyclone Cyd shows how to get a saab replacement key to replace the battery of the remote key fob in only four steps. This guide should work with any modern saab key fob however the procedure might differ slightly.

This button is usually located next to the Saab logo on the back of the fob. This button is usually located just below the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This should be enough to allow you to open the fob case so that you can replace the battery.

After you have installed the batteries CR1632, you can rebuild the remote key fob. You can then program it into your car. The entire process should not exceed an hour. This is a straightforward process that doesn't require any special tools.

If you lose a key, the process is somewhat more complex however it can be accomplished. The dealer will have to determine the VIN of the car and then order a new key blade and a TWICE module with the exact unique code. After that, they'll have to cut the new key and then program it with the latest software tool known as MDI.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car. It has a battery within. Batteries have a finite lifespan and will eventually die. This is a typical issue that happens to all cars, and the good news is that you can replace the batteries on most fobs, without replacing the entire case. Amazon sells fobs for replacement that already have all the electronics installed. You can simply remove the case and replace the batteries. You'll need to remove the emergency key before you replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot that is in the middle of the. The case will split when you rotate the screwdriver around it.

When you're ready to replace your keys, ensure that you have spare keys, as this will reduce your total cost by a substantial amount. If you have a spare, you can ask the dealer cut an entirely new key and then program it into your car, which is cheaper than replacing the entire key fob.

If you do not have a spare key, it is possible to add a second key to your car, but it requires a lot of research and effort. The cost of adding a second key is a few hundred dollars, and also requires programming of the car's computer. Professionals can accomplish this however, it's a costly option.

Replacement Ignition

In contrast to the earlier Saab cars, the modern saab car key replacement 9-3 models have a much more sophisticated alarm system that is built on a key code. If you lose your sole key, it could be costly to replace it with another one since the car needs to be equipped with a specific computer and be programmed to accept a new key. Most locksmiths cannot do this and even dealers will charge hundred dollars to program the new key!

If you've lost the only working key the dealer will replace your car's computer (known as the CIM or saab key replacement TWICE) to make an exchange, and they will charge you a premium price for it. We can reprogramme the existing EEPROM in your car computer to make it ready to accept an additional key. This will save you more than 50% on the price you'd have to pay an auto dealer.

If you have owned a car like the SAAB 9-3 for quite a while you are aware that the ignition keys are not very durable. If your ignition key isn't functioning properly, you must think about replacing it. They can become very sticky and the buttons can fall off. The good news is that replacing the ignition key isn't as complicated as it seems and is fairly easy to do with the proper tools.