The Little Known Benefits Of Saab 9-3 Key Replacement

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of specific steps to add a second ignition key. This requires an electronic handheld computer, referred to as Tech-2 which is to be used by the dealer. Then, a new transponder and key are required to be purchased.

It is a good idea to rotate your keys so that one doesn't get worn out more quickly than the other. This will keep your keys in perfect condition.

Replacement Case

The new key fobs are not like the old Saab keys. They are equipped with electronics that make them difficult to duplicate. This has made theft of cars a lot more difficult than it was a few years ago. However, it has made the replacement of lost keys a much more costly endeavor.

Every owner of a Saab 9-3 should have at least two functioning keys. If one is lost it costs a lot of money to replace it in the car because it involves replacing the CIM module and reprogramming the locking cylinders. Dealers usually charge between $100-$200 to do this.

There are ways to avoid the high cost. Some parts suppliers will use the code of a spare key to cut a new metal blade at a fraction the price of the dealer. The key must, however, be the same as the original in order to function in your vehicle.

Follow these steps to replace the case. You'll require a flathead screwdriver along with some patience. With the screwdriver, you can pry apart the plastic and remove the emergency key. Once the case is opened, take out the electronics and place them into your new case. Make sure you insert the correct key and badge back into the case as well.

Replacement Battery

The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced quickly and easily. Cyclone's YouTube video Cyd demonstrates how you can replace the battery of the remote fob with just four steps. This tutorial should work for any modern saab key fob, however the procedure might differ slightly.

This button is usually located next to the Saab logo on the back of the fob. The button is usually found on the back of your fob, right next to the saab Key programmer Logo. Use a flathead to insert the screwdriver into the tiny hole in this button. This should be sufficient to allow you to open the fob case in order to change the battery.

After you have installed the batteries CR1632, you can restore the remote key fob. You can then program it into your car. The whole process should take more than an hour, if not less. It's a very easy process that does not require any special equipment.

If you lose a key, the procedure will be more complicated, but it can still be accomplished. The dealer has to verify the VIN of the car, and then request a replacement key blade and a TWICE module with the proper unique code. After that, they will need to cut the replacement key and then program it with a brand new tool for programming called MDI.

Replacement Key Fob

The key fob contains an internal battery that is used to lock and unlock your vehicle. Batteries have a limited lifespan and will eventually die. This is a problem that happens to all cars and the good news is that you can change the batteries in a majority of key fobs without replacing the whole case. Amazon sells replacement fobs that have all the electronic components in place. It is easy to open the case and replace the batteries. You'll need to take out the emergency key before you replace the batteries. To do this, place the screwdriver of a small flat head into the slot that is in the middle of the. The case will split once you turn the screwdriver around it.

If you're about to replace the keys, make sure you have a spare, as this can reduce your total cost by a substantial amount. If you have an additional key, you can ask the dealer to cut it and program it to your vehicle. This is less expensive than purchasing a new fob.

It is possible to add another key to your vehicle if you don't already have one, but it requires an extensive amount of research and effort. The cost of adding a second key is several hundred dollars and it requires programming of the car's computer. Professionals can accomplish this but it's not a cheap option.

Replacement Ignition

The new SAAB 9-3 features an alarm system that is more sophisticated based on a key code. If you lose your sole key, it may be expensive to add another one since the car needs to have a specific computer installed and also be programmed to accept a brand new key. Dealers can charge hundreds of dollars to program an entirely new key, when they are not able to do it.

If you've lost your sole working key, a dealer will replace the computer in your car (known as the CIM or saab replacement key TWICE) to create the replacement, and will charge a premium for it. We can reprogram the current EEPROM on your car's computer so that it's ready to accept an additional key. This will save you more than 50% off the cost you would pay the dealer.

If you've owned a saab 93 key programming 9-3 a long time and you're aware of the ignition keys aren't very durable. They can be extremely sticky and the buttons are known to be removed from them every now and then and you should think about buying a new one if the one you have isn't functioning properly. It's not as difficult as you think to replace the ignition key. With the right tools, it is able to be accomplished in a matter of minutes.