See What Saab 9-3 Key Replacement Tricks The Celebs Are Using

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of unique steps to add an additional ignition key. This requires a handheld computer, called Tech-2, to be used by the dealer. Then the transponder is replaced and a key have to be purchased.

Rotate your keys to stop one from wearing out more than another. This will also ensure that your keys remain in pristine condition.

Replacement Case

The new key fobs for keys are not like the old Saab keys. They're equipped with electronic devices which make it hard to duplicate. This has made stealing car keys considerably more difficult than it was years ago. However, it also has made the replacement of lost keys a more expensive endeavor.

Every owner of a saab key battery 9-3 needs to have at minimum two working keys. If one is lost it costs a lot to replace it in the car because it involves replacing the CIM module, and then reprogramming the locking cylinders. Dealers usually charge between $100-$200 for this.

There are ways to reduce the high cost. Some parts providers will use the code of an old key to cut a new metal blade for a fraction of what the dealer charges. The key must, however, be identical to the original to work correctly in your car.

Follow these steps to replace the case. You will need a flathead screwdriver along with some patience. With the screwdriver, pry apart the plastic and remove the emergency key. After the case is open take out all electronic components and put them back in your new case. Be sure to put the correct key and badge back into the case, as well.

Replacement Battery

The saab car key 9-3 key [visit the next page] 9-3 replacement battery is a cheap part that can be quickly and easily replaced. This YouTube video by Cyclone Cyd shows how to replace the remote fob battery in only four steps. This tutorial should work for any modern saab key fob though the process may vary slightly.

The first step is to find the button that opens the backup key on the fob. It's usually near the Saab logo on the back of the fob. Next take the flathead screwdriver to insert into the small hole in this button. This will be enough to allow you to open the fob's case to allow you to replace the battery.

After the new battery CR1632 is in place it is possible to reassemble the remote key fob, and then program it to your car. The procedure should take no more than an hour, if not less. It's a simple process that does not require any special equipment.

The procedure is a little more complex if you lose your key, but it's possible. The dealer needs to first determine the VIN of the vehicle and order the replacement TWICE module as well as key blade with the proper unique code. The dealer will then need to program the key using MDI, a brand new software tool.

Replacement Key Fob

The key fob is equipped with an internal battery that is used to lock and unlock your vehicle. The batteries last for a certain time and eventually die. This is a problem that occurs in all vehicles. The good news is you can replace the battery on most key fobs without having to replace the entire case. You can buy replacement fobs from Amazon that have all the electronics already installed, which means you can just pop open the case and replace the batteries that were in the case. You will need to remove the emergency key before you can replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot in the middle of the. The screwdriver should be moved around the case until it is split open, making it easier to remove.

If you're looking to replace your keys, be sure to have a spare in your possession. This will save you lots of money. If you have an extra key, request the dealer to cut it in half and program it to your vehicle. This is a lot less expensive than purchasing a new fob.

It is possible to add another key to your car if you don't already have one, but it takes some research and work. It costs around a hundred dollars to get a second car key. The computer of the vehicle must also be programmed. This can be done by a professional, however it is an expensive option for most owners.

Replacement Ignition

The latest SAAB 9-3 is a more sophisticated alarm system that is based on a key code. This means that when you lose your sole functioning key, getting another key can be extremely expensive because the car needs to have a special computer module added and it also needs to be specifically programmed to accept an extra key. Even a dealer can charge hundreds of dollars to program the new key if they are unable to do it.

Dealers will charge you a premium to replace your car's computer (also known as the CIM or SAAB twice) If you lose your sole working key. We can reprogram the EEPROM of your car's computer to be ready for an additional key. This will save you more than 50% off the price you'd have to pay an auto dealer.

If you've owned a car like the saab 93 key replacement 9-3 for quite a while and you're aware of the ignition keys aren't very durable. They can get extremely sticky and the buttons are known to fall off occasionally which is why you should think about buying a new one if the one you have isn't working properly. It's good to know that replacing the ignition key isn't as complicated as it seems and can be done quickly with the proper tools.