11 Ways To Completely Revamp Your Double Glazing Door Lock Repairs

Double Glazing Door Lock repairs double glazed windows

Has your uPVC window or door mechanism deteriorated? Perhaps the door or window handles aren't aligned properly or are hard to use.

You'll be wasting energy when your double-glazed doors do not function properly. This also increases the chance of burglary. Owen the Locksmith can repair your door lock for reasonable costs.

Snapped Key

When a key snaps off in the lock, it can be incredibly annoying. It can also be a security issue, as it may make you vulnerable to a burglar if the door is not locked. There are a few quick fixes you can try to resolve the issue and make your door work again.

Be calm. If you panic, you could end up pushing the broken key further into the lock.

Next spray WD-40 or a different penetrating oil into the lock to aid in making the broken piece to slide out more easily. You can also use a screwdriver to break any pieces that are stuck. If you have a chunk of the key that's still sticking out and is not being removed, grab it with a paperclip or another thin metal object and pull it. Both of these methods work well, however, be very careful not to push the broken piece of the key even further into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you don't happen to have any of these items then you can bend a hook with needle-nosed pliers. Finally, you can use a pair tweezers to grab and remove the remaining pieces of broken keys.

If you're unable to pull the broken piece of key out, try using a lock de-icer. It is available at all hardware stores, and it works by freezing any moisture or ice that might be inside the lock.

If none of these solutions work, it may be time to consult a locksmith. Fitlocks experts can quickly solve problems like broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to make them more user-friendly. Book a double glazing repair with us online, or give us a phone call to discuss your needs.

Broken Cylinder

A broken cylinder is an extremely risky security issue. It's fortunately a simple repair double glazing window for a professional locksmith to complete. To fix the cylinder locksmiths will need to tap it. They can do this using a hammer or other tool, but the most efficient way is to make use of an extended match or piece of wire. Then, place the match's end or wire in the keyway. The locksmith can then strike the lock in order to crack it. This is much better than using a heavy hammer that could cause damage to the lock.

Overheating is the primary reason behind cylinder heads cracking. This can occur when the cylinder block as well as the cylinder head are made of different metals, like cast iron and aluminium. Different metals will heat up and cool off at different rates. This could cause localized hotspots to expand faster than the rest.

Another possible cause for cylinder cracks is corrosion. If the cylinder block and head are not maintained correctly they may rust or corrode, which can cause them to expand faster than they would normally. As time passes, this may also cause cracks.

If your uPVC window or door lock is stiff and requires a lot of pressure to turn, it could be due to a variety of causes. A defective locking mechanism, misalignment or the wear of the handle are typical causes of this problem.

It is a quick and affordable fix that the majority of double glazing window repair glazing owners can do. A professional locksmith will typically be able to resolve the issue within an hour after arriving at your residence. They can fix the locking mechanisms, or change the window handles and change the gearboxes, based on the specific requirements of your home. A locksmith with experience will always be able to advise you on the most cost-effective options for your home. They can even suggest upgrades to 3 Star security TS007 euro cylinders that will add an extra layer of protection against burglars. It is a small cost to pay for the peace-of-mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not surprising that window handle locks can break. They have intricate mechanisms which deteriorate over time. It can be difficult to determine the cause of a broken window handle lock and then fix it properly.

Whether the problem is related to the locking mechanism inside or the latch, fixing the broken handle will increase your uPVC double glaze repair glazing door's security and help you to stop draughts. When you aren't doing it right, replacing or repairing double glazing your handle can be very costly and may cause damage to the door's frame and lock It is therefore worth taking some time to do it correctly.

Screwdriver Open the window remove the screw that holds the handle. The screw should be on the inside of the back plate, and is normally covered by an attractive cover for the screw for aesthetic reasons. It is important to not lose any internal components of the handle such as the levers and plates on either side. It is best to keep them in the same order so that you can replace them again in the event of a need.

Then, with an additional screwdriver take the screw off that holds the handle to the spindle at the back. Once this is removed, you should be able to pull the handle away and pull off the damaged spindle. Replace it with a new one, making sure that it's the same size as the old one (you can typically find these on the internet or at hardware stores) and securely screw it into the correct position. Be careful not to overtighten because this could cause damage to the handle or the window frame.

Make sure the new handle is installed after which you can close and test the handle. It should function smoothly and you'll be able to open your windows once more.

Be sure to double-check that your uPVC window is shut properly when you're working with the handle. If they're not closing correctly, you could encounter damp or draughts inside your home. Also, you could be compromising the energy efficiency of your home. Core Sash Windows is a local window company that can alter the hinges of the frames of your windows to ensure that they close correctly.

Broken Spindle

It is more typical for the spindle to break rather than the handle. This is especially common with uPVC tilt-and-turn windows. These windows require a handle that acts as an locking device within the window frame. The handle is attached to a centre rod that is then activated by a series of cams that look like mushrooms, they locks are inserted into the window frame. If the dead latch mechanism fails to open when the handle is turned it is possible that the spindle has been damaged This can be an extremely frustrating issue.

There are solutions to this problem. A reputable locksmith can quickly and effectively fix this problem. A professional locksmith will be able to disassemble the handle of the window by using a tool to remove the wheel part where the spindle is located. This can be done without damage to the handle or window frame.

After removing the wheel the technician can examine the spindle and identify the cause of the break. This involves breaking the spindle into its individual components and carefully observing their general condition as in addition to any specific areas of wear or damage. This procedure is typically carried out by technicians working in a clean environment.

Then, clean the damaged spindle. This will help remove any dirt or debris which could be hindering it from working normally. Following this, the spindle could be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is comparable in size to the original. Then, he will drill matching holes into both pieces. This will ensure that the new spindle is an exact fit with the handle.

If the damaged spindle can't be repaired it may require replacement. Home centres sell generic substitutes but if the window design is unique you'll need to contact an expert in woodworking or cabinet making who can recreate the exact part. Once the spindle has been installed, it can be attached to the handle. Line up the screw holes on the handle with the screws that are already in the frame. Once the new handle is firmly seated you will be ready to operate your uPVC window.